Safe Manual

Quick Start Guide:

Opening the Safe:

1. Enter your user code (3-8 digits) using the keypad. The code will not be displayed on the screen for security (secret code entry mode)
2. Press the ENTER button (you may need to press it twice)
3. Turn the knob counter-clockwise to open the door

Closing the Safe:

1. Close the door firmly
2. Turn the knob clockwise to lock the safe

Setting or Resetting Your User Code:

1. Open the safe and locate the RESET button inside the door
2. Press and hold the RESET button while entering your new code (3-8 digits)
3. Follow the display prompts. You may need to enter your new code twice to confirm
4. Save your code in a secure place - you'll need it to open the safe

Sound Settings:

• To toggle sound on/off, press buttons 3 and 0 simultaneously
• When sound is enabled (BUZZER mode), you'll hear beeps when pressing buttons. When disabled (SILENT mode), there will be no sound

Important Notes:

• Secret Code Entry: When entering your code, it will not be displayed on the screen for security purposes
• Always turn the knob clockwise to lock the safe after closing the door
• Keep your code secure and do not share it with others
• Lockout Protection: After 4 incorrect code attempts, the safe will lock down for 3 minutes as a security measure
• If you forget your code, contact us immediately for assistance

Click on the image below to view the full manual in detail:

Click to zoom in